FD 100/320Gbps NT and FX NT IHub Services Guide Virtual Private Routed Network Service
Issue: 13 3HH-11985-AAAA-TQZZA 599
 
7.10.12.37 route-table
Table 664 route-table command
Table 665 describes the standard command output fields for the route table.
Table 665 Show Route Table Standard Output
RIPv2 Requests Received Total — The total number of times the router received RIPv2 route requests from 
other routers.
Last 5 Min — The number of times the router received RIPv2 route requests from 
other routers in the last 5 minutes.
Last 1 Min — The number of times the router received RIPv2 route requests from 
other routers in the last minute.
RIPv2 Requests Ignored Total — The total number of times the router ignored RIPv2 route requests from 
other routers.
Last 5 Min — The number of times the router ignored RIPv2 route requests from 
other routers in the last 5 minutes.
Last 1 Min — The number of times the router ignored RIPv2 route requests from 
other routers in the last minute.
Authentication Errors Total — The total number of authentication errors to secure table updates.
Last 5 Min — The number of authentication errors to secure table updates in the 
last 5 minutes.
Last 1 Min — The number of authentication errors to secure table updates in the 
last minute.
Label Description
(3 of 3)
Item Description
Syntax route-table [ip-prefix[/mask] [longer] | [protocol protocol] | [summary]]
Context show>route
Description This command displays the active routes in the routing table.
If no command line arguments are specified, all routes are displayed, sorted by prefix.
Parameters ip-prefix[/mask] — Displays routes only matching the specified ip-prefix and optional mask.
longer — Displays routes matching the ip-prefix/mask and routes with longer masks.
protocol protocol — Displays routes learned from the specified protocol.
Values: bgp, isis, local, ospf, rip, static, aggregate, managed
summary — Displays a route table summary information.
Label Description
Dest Address The route destination address and mask.
(1 of 2)