FD 100/320Gbps NT and FX NT IHub Services Guide Internet Enhanced Service
Issue: 13 3HH-11985-AAAA-TQZZA 413
6.10.9.16 sap
Table 400 sap command
DHCP Details
Description Provides the description of the IES interface.
Admin state Specifies the administrative state for DHCP relay.
Lease Query Specifies whether the Lease Query is enabled or disabled.
Servers Specifies the configured DHCP servers.
Gi-Addr Specifies the gateway interface address for DHCP relay.
Gi-Addr as Src Ip Specifies whether the GUI address should be used as the source IP address for DHCP
relay packets.
Action Specifies whether the information in a DHCP packet should be kept and the router
should not add any additional information.
Remote-id Check Specifies whether the remote ID check is enabled or disabled for local proxy ARP.
DHCP6 Relay Details
Admin State Specifies the administrative state for DHCP6 Relay.
Lease Populate Specifies the maximum number of allocated DHCPv6 lease states.
Prefix Stability Specifies whether Prefix Stability is enabled or disabled.
Prfx Hld Dwn Time Specifies the expiry time for prefix hold down timer.
Operl State Specifies the operational state for DHCP6 Relay.
If-Id Option Specifies the interface ID.
Remote ID Specifies whether the far-end MAC address is inserted in Remote ID sub-option of
Option 82.
Src Addr Specifies the configured source address.
ICMP Details
Redirects Specifies the rate for ICMP redirect messages.
Unreachables Specifies the rate for ICMP unreachable messages.
TTL Expired Specifies the rate for ICMP TTL messages.
Label Description
(2 of 2)
Item Description
Syntax sap sap-id detail
Context show>service>id
Description Displays information for the SAPs associated with the service.
If no optional parameters are specified, a summary of all associated SAPs is displayed.
(1 of 2)
To Next Page
Loading...
