Virtual Private Routed Network Service
462
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
7.10.2.25 sgt-qos
Table 435 sgt-qos command
7.10.2.26 qos
Table 436 qos command
Description This command sets the router ID for a specific VPRN context.
If neither the router ID nor the system interface are defined, the router ID from the base router
context is inherited.
The no form of the command removes the router ID definition from the given VPRN context.
Default No router-id
Parameters ip-address — Specify the IP address in dotted decimal notation.
Item Description
(2 of 2)
Item Description
Syntax sgt-qos sgt-qos-policy
[no] sgt-qos
Context configure>service>vprn
Description This command enables the context to configure DSCP/Dot1p re-marking for self-generated
traffic.
Parameters sgt-qos-policy — Integer 1-65535.
Item Description
Syntax qos policy-id
no qos
Context configure>service>vprn>ingress
(1 of 2)
To Next Page
Loading...
Need help?
General
