Nokia 7330 - Lease-Query; Table 342 Lease-Query Command; Table 343 Option Command; Table 344 Action Command

FD 100/320Gbps NT and FX NT IHub Services Guide Internet Enhanced Service
Issue: 13 3HH-11985-AAAA-TQZZA 381
6.10.5.3 lease-query
Table 342 lease-query command
6.10.5.4 option
Table 343 option command
6.10.5.5 action
Table 344 action command
Item Description
Syntax lease-query {enable | disable}]
no lease-query
Context configure>service>ies>interface>dhcp
Description Enables lease-query functionality in this interface. Enable will process broadcast LQ and
Disable will discard broadcast LQ, but irrespective of Enable/Disable, unicast LQ will be
forwarded.
Default The default value is Disabled.
Parameters {Enable} — Lease query received on the interface will be processed. Both single and bulk
lease query are supported. Single lease query based on IP address will be supported. Bulk
lease query based on remote ID will be supported.
{Disable} — Lease query functionality is disabled on the interface. Lease query packets
received on the interface will be dropped.
Note: Legacy behavior of forwarding unicast LQ packets will be continued.
Item Description
Syntax no option
Context configure>service>ies>interface>dhcp
Description This command enables DHCP Option 82 (Relay Agent Information Option) parameters
processing and enters the context for configuring Option 82 sub-options.
The no form of this command returns the system to the default.
Default No option
Item Description
Syntax action { keep}
no action
(1 of 2)