Nokia 7330 - Common Configuration Tasks

Internet Enhanced Service
360
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
exit
no shutdown
----------------------------------------------
*A:ALA-48>configure>service#
6.6 Common Configuration Tasks
This section provides a brief overview of the tasks that must be performed to
configure IES services and provides the CLI commands.
1 Associate an IES service with a customer ID.
2 Associate customer ID with the service.
3 Assign an IP address.
4 Create an interface.
5 Define SAP parameters on the interface
• Select node(s) and port(s).
• Optional - select filter policies (configured in the configure>filter context).
6.7 Configuring IES Components
Use the CLI syntax to configure the following entities:
• Configuring an IES Service
• Configuring IES Interface Parameters
• Configuring SAP Parameters
6.7.1 Configuring an IES Service
Use the following CLI syntax to create an IES service:
The following example displays a basic IES service configuration.
A:ALA-48>configure>service#
----------------------------------------------
...
ies 1001 customer 1730 create
description "to-internet"
no shutdown
exit
----------------------------------------------
A:ALA-48>configure>service#