Nokia 7330 - Neighbor; Table 679 Neighbor Command; Table 680 Protocol Command

Virtual Private Routed Network Service
606
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
7.10.13.8 neighbor
Table 679 neighbor command
7.10.13.9 protocol
Table 680 protocol command
Item Description
Syntax neighbor {ip-address | as as-number | external | all} [soft | soft-inbound]
neighbor {ip-address | as as-number | external | all} statistics
neighbor ip-address end-of-rib
Context clear>router>bgp
Description This command resets the specified BGP peer or peers. This can cause existing BGP
connections to be shutdown and restarted.
Parameters ip-address — Resets the BGP neighbor with the specified IPv4 or IPv6 address.
as as-number — Resets all BGP neighbors with the specified peer AS.
external — Resets all EBGP neighbors.
all — Resets all BGP neighbors.
soft — The specified BGP neighbor(s) re-evaluates all routes in the Local-RIB against the
configured export policies.
soft-inbound — The specified BGP neighbor(s) re-evaluates all routes in the RIB-In against
the configured import policies.
statistics — The BGP neighbor statistics.
end-of-rib —
Item Description
Syntax protocol
Context clear>router>rip
Description This command resets the entire BGP protocol. If the AS number was previously changed, the
BGP AS number does not inherit the new value.