Nokia 7330 - Clear Commands

FD 100/320Gbps NT and FX NT IHub Services Guide Virtual Private Routed Network Service
Issue: 13 3HH-11985-AAAA-TQZZA 603
7.10.13 Clear Commands
7.10.13.1 arp
Table 672 arp command
7.10.13.2 dhcp6
Table 673 dhcp6 command
Info Option Indicates whether Option 82 is enabled.
Admin State Indicates the administrative status.
Label Description
(2 of 2)
Item Description
Syntax arp {all | ip-address}
arp interface [ip-int-name | ip-address]
Context clear>router
Description This command clears all or specific ARP entries.
The scope of ARP cache entries cleared depends on the command line option(s) specified.
Parameters all — Clears all ARP cache entries.
ip-addr — Clears the ARP cache entry for the specified IP address.
interface ip-int-name — Clears all ARP cache entries for the interface with the specified name.
interface ip-addr — Clears all ARP cache entries for the specified interface with the specified
address.
Item Description
Syntax dhcp6
Context clear>router
Description This command enables the context to clear and reset DHCP6 entities.