Nokia 7330 - Clear Commands

Virtual Private LAN Service
248
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
— mfib [brief] [ip]
— mfib group grp-address
— mstp-configuration
— sap [sap-id [detail | sap-stats]]
— sap [sap-id curr-15min-stats]
— sap [sap-id curr-day-stats]
— sap [sap-id prev-15min-stats [interval-number interval-number]]
— sap [sap-id prev-day-stats [interval-number interval-number]]
— stp [detail]
— stp mst-instance mst-inst-number
— l2-route-table [detail] [bgp-ad] [bgp-vpls] [all-routes]
— sap-using [sap sap-id]
— sap-using interface ip-address | ip-int-name
5.15.1.4 Clear Commands
clear
— service
— id service-id
— dhcp
— statistics [sap sap-id|interface [ip-address|ip-int-name]]
— fdb{all|mac ieee-address|sap sap-id|mesh-sdp sdp-id[:vc-id]|spoke-sdp sdp-id:vc-id}
— igmp-snooping
— querier
— statistics {all | sap sap-id | sdp sdp-id:vc-id}
— mesh-sdp sdp-id:[vc-id] ingress-vc-label
— spoke-sdp sdp-id:vc-id ingress-vc-label
— stp
— detected-protocols [all | sap sap-id]]
— statistics
— id service-id
— counters
— mesh-sdp sdp-id:[vc-id] {all | counters}
— spoke-sdp sdp-id
:vc-id {all | counters}
— stp
— sap sap-id {all | stp}
5.15.1.5 Debug Commands
debug
— service
— id service-id
— igmp-snooping
— detail-level {low | medium | high}
— no detail-level
—[no] mac ieee-address
— mode {dropped-only | ngr-and-dropped | egr-ingr-and-dropped}
— no mode
—[no] sap sap-id
— stp
— all-events
—[no] bpdu
—[no] core-connectivity
—[no] exception
—[no] fsm-state-changes
—[no] fsm-timers
—[no] port-role
Note — The show stp command can only be used in m-VPLS