Nokia 7330 - Delayed-Enable; Table 334 Delayed-Enable Command; Table 335 Ip-Mtu Command

Internet Enhanced Service
376
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
6.10.4.5 delayed-enable
Table 334 delayed-enable command
6.10.4.6 ip-mtu
Table 335 ip-mtu command
Parameters transmit-interval - Sets the transmit interval, in milliseconds, for the BFD session.
Values 100 — 100000
Default: 100
receive receive-interval - Sets the receive interval, in milliseconds, for the BFD session.
Values 100 — 100000
Default: 100
multiplier multiplier - Set the multiplier for the BFD session.
Values 3 — 20
Default: 3
Item Description
(2 of 2)
Item Description
Syntax delayed-enable seconds
no delayed-enable
Context configure>service>ies>interface
Description This command configures the delay making interface operational by the specified number of
seconds
The no form of the command reverts to the default value.
Default 300 seconds
Parameters seconds — Specifies the delay time interval in seconds.
Values 1 — 1200
Item Description
Syntax ip-mtu octets
no ip-mtu
Context configure>service>ies>interface
(1 of 2)