Virtual Private Routed Network Service
594
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
Table 656 Show RIP Route Database Output
7.10.12.34 neighbor
Table 657 neighbor command
Table 658 describes the standard command output fields for a RIP neighbor.
Table 658 Show RIP Neighbor Output
Label Description
Destination The RIP destination for the route.
Displays how many seconds the specific route will remain in the routing table.
When an entry reaches 0, it is removed from the routing table.
Peer The router ID of the peer router.
NextHop The IP address of the next hop.
Metric The hop count to rate the value of different hops.
Tag The value to distinguish between internal routes (learned by RIP) and external
routes (learned from other protocols).
TTL Displays how many seconds the specific route will remain in the routing table.
When an entry reaches 0, it is removed from the routing table.
Valid No — The route is not valid.
Yes — The route is valid.
Item Description
Syntax neighbor [ip-address | ip-int-name] [detail] [advertised-routes]
Context show>router>rip
Description Displays RIP neighbor interface information.
Parameters ip-address | ip-int-name — Displays information for the specified IP interface.
Default: All neighbor interfaces.
advertised-routes — Displays the routes advertised to RIP neighbors. If no neighbors are
specified, then all routes advertised to all neighbors are displayed. If a specific neighbor is
given then only routes advertised to the given neighbor/interface are displayed.
Default: Display RIP information.
Label Description
Neighbor The RIP neighbor interface name.
Adm Down — The RIP neighbor interface is administratively down.
Up — The RIP neighbor interface is administratively up.
(1 of 2)
To Next Page
Loading...
