FD 100/320Gbps NT and FX NT IHub Services Guide Services Overview
Issue: 13 3HH-11985-AAAA-TQZZA 91
3.17.4.9 y1731pm
Table 25 y1731pm command
3.17.4.10 shutdown
Table 26 shutdown command
3.17.4.11 priority
Table 27 priority command
Item Description
Syntax domain md-index association ma-index mep mep-id session session-id [create]
Context configure>eth-cfm>y1731pm
Description This command creates a y1731pm session for the given mep.
The no form of the command will remove the y1731pm session.
Parameters domain – Connectivity Fault Management domain
association- Maintenance Association for the Domain
mep - CFM Maintenance Endpoint
session - creates a session for the given mep
Item Description
Syntax shutdown
Context configure>eth-cfm>y1731pm>domain
Description Indicates the desired administrative state of the y1731pm session.
The no form of the command will admin enable the y1731pm session.
Default Disabled
Item Description
Syntax priority type
Context configure>eth-cfm>y1731pm>domain
Description The value of Priority specifies the priority used in the generated test frame for the Y1731 PM
(LM/DM/SLM) session.
This parameter can be set only when admin status is set to disabled.
The no form of the command reverts the value to the default.
(1 of 2)
To Next Page
Loading...
Need help?
General
