Virtual Private Routed Network Service
600
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
7.10.12.38 rtr-advertisement
Table 666 rtr-advertisement command
Table 667 describes the standard command output fields for the route advertisement
table.
Table 667 Show Route Advertisement Table Standard Output
Next Hop The next hop IP address for the route destination.
Type Local — The route is a local route.
Remote — The route is a remote route.
Protocol The protocol through which the route was learned.
Age The route age in seconds for the route.
Metric The route metric value for the route.
Pref The route preference value for the route.
No. of Routes: The number of routes displayed in the list.
Label Description
(2 of 2)
Item Description
Syntax rtr-advertisement [interface ip-int-name] [prefix ipv6-prefix[/prefix-length]]
rtr-advertisement [conflicts]
Context show>router service-id
Description This command displays router advertisement information.
If no command line arguments are specified, all routes are displayed, sorted by prefix.
Parameters ip-int-name — Maximum 32 characters.
ip-prefix — The IP prefix for prefix list entry in dotted decimal notation.
Values: ipv4-prefix a.b.c.d (host bits must be 0)
ipv4-prefix-length 0 — 32
ipv6-prefix x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 — FFFF]H
d: [0 — 255]D
ipv6-prefix-length 0 — 64
Label Description
Rtr Advertisement Tx/Last
Sent
The number of router advertisements sent and time since they were sent.
(1 of 2)
To Next Page
Loading...
Need help?
General
