Virtual Private Routed Network Service
448
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
7.10.1.2 description
Table 409 description command
Table 410 description command
Item Description
Syntax description description-string
no description
Context configure>service>vprn>interface>dhcp
configure>service>vprn>bgp
configure>service>vprn>rip
configure>service>vprn>interface>dhcp
configure>service>vprn>interface>ipv6>dhcp6-relay
configure>service>vprn>interface>sap
configure>service>vprn>interface>dhcp
configure>service>vprn>bgp
configure>service>vprn>bgp>group
configure>service>vprn>bgp>group>neighbor
configure>service>vprn>rip
configure>service>vprn>rip>group
configure>service>vprn>rip>group>neighbor
Description This command creates a text description stored in the configuration file for a configuration
context.
The description command associates a text string with a configuration context to help identify
the content in the configuration file.
The no form of this command removes the string from the configuration.
Default No description associated with the configuration context.
Parameters description-string — The description character string. Allowed values are any string up to 80
characters long composed of printable, 7-bit ASCII characters. If the string contains special
characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
Item Description
Syntax description description-string
no description
Context configure>service>vprn
configure>service>vprn>interface
Description This command creates a text description stored in the configuration file for a configuration
context.
The description command associates a text string with a configuration context to help identify
the content in the configuration file.
The no form of this command removes the string from the configuration.
Default No description associated with the configuration context.
(1 of 2)
To Next Page
Loading...
