Nokia 7330 - Show Commands; Clear Commands; VLL Service CLI Configuration Commands

FD 100/320Gbps NT and FX NT IHub Services Guide Virtual Leased Line Services
Issue: 13 3HH-11985-AAAA-TQZZA 123
— ccm-ltm-priority priority
— no ccm-ltm-priority
— low-priority-defect{allDef|macRemErrXcon|remErrXcon|errXcon|xcon|noXcon}
— mac-address mac-address
— no mac-address
—[no] shutdown
— mip [mac mac-address]
— mip default-mac
— no mip
— vlan-dot-1q-etype etype
— no vlan-dot-1q-etype
4.5.2 Show Commands
show
— service
— egress-label start-label [end-label]
— ingress-label start-label [end-label]
— sap-using [sap sap-id]
— sap-using [ingress | egress] filter filter-id
— sdp [sdp-id | far-end ip-addr] [detail]
— sdp-using [sdp-id[:vc-id] | far-end ip-address]
— id service-id
— all
— base
— labels
— sap [sap-id] [detail]]
— sdp [sdp-id | far-end ip-address] [detail]
4.5.3 Clear Commands
clear
— service
— id service-id
— spoke-sdp sdp-id:vc-id ingress-vc-label
— statistics
— id service-id
— counters
— spoke-sdp sdp-id:vc-id {all | counters}
4.6 VLL Service CLI Configuration Commands
The following commands are described:
• Generic Commands
• VLL Global Commands
• VLL SAP Commands
• Service Filter and QoS Policy Commands
• VLL SDP Commands
• Show Commands
• Clear Commands