Nokia 7330 - Table 365 Time-Exceeded Command; Table 366 Unreachables Command

Internet Enhanced Service
392
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
6.10.7.14 time-exceeded
Table 365 time-exceeded command
6.10.7.15 unreachables
Table 366 unreachables command
Parameters number — The maximum number of ICMP param-problem messages to send. This parameter
must be specified with the seconds parameter.
Values: 10 — 1000
seconds — The time frame in seconds used to limit the number of ICMP param-problem
messages that can be issued.
Values: 1 — 60
Item Description
(2 of 2)
Item Description
Syntax time-exceeded [number seconds]
no time-exceeded
Context configure>service>ies>interface>ipv6>icmp6
Description This command configures the rate for ICMP time-exceeded messages issued on the router
interface.
By default, generation of ICMP time-exceeded messages is enabled at a maximum rate of 100
per 10 second time interval.
The no form of this command disables the limiting the rate of time-exceeded on the router
interface.
Default time-exceeded 100 10
Parameters number — The maximum number of ICMP time-exceeded messages to send. This parameter
must be specified with the seconds parameter.
Values: 10 — 1000
seconds — The time frame in seconds used to limit the number of ICMP time-exceeded
messages that can be issued.
Values: 1 — 60
Item Description
Syntax unreachables [number seconds]
no unreachables
Context configure>service>ies>interface>ipv6>icmp6
(1 of 2)