Nokia 7330 - Table 213 Mep Command; Table 214 CCM-Enable Command

Virtual Private LAN Service
300
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
5.16.4.6 mep
Table 213 mep command
5.16.4.7 ccm-enable
Table 214 ccm-enable command
Item Description
Syntax mep mep-id domain md-index association ma-index [direction {up | down}]
mep mep-id domain md-indexassociation ma-index
Context configure>service>vpls>sap>eth-cfm
configure>service>vpls>mesh-sdp>eth-cfm
configure>service>vpls>spoke-sdp>eth-cfm
configure>eth-ring>path>eth-cfm
Description This command enables the Configuration of a Ethernet CFM Maintenance Endpoint
Parameters mep-id - MEP Identifier
Values: 1...8191
md-idex - Maintenance Domain Identifier
Values: 1...4294967295
ma-index - Maintenance Association Identifier.
Values: 1...4294967295
direction - Specifies the direction of the MEP.
Values: up/down
Default value: down
Item Description
Syntax [no] ccm-enable
Context configure>service>vpls>sap>eth-cfm>mep
configure>service>vpls>mesh-sdp>eth-cfm>mep
configure>service>vpls>spoke-sdp>eth-cfm>mep
configure>eth-ring>path>eth-cfm>mep
Description This command enables the generation of CCM messages.
The no form of the command disables the generation of CCM messages.
Default no ccm-enable