Nokia 7330 - Period; Data-Size; Table 28 Period Command; Table 29 Data-Size Command

Services Overview
92
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
3.17.4.12 period
Table 28 period command
3.17.4.13 data-size
Table 29 data-size command
Default 7
Parameters priority — <0,1,2…7>
Item Description
(2 of 2)
Item Description
Syntax period period
Context configure>eth-cfm>y1731pm>domain
Description The value of period specifies the time to wait between the transmission of one OAM request
and the next. This parameter can be set only when admin status is set to disabled. The
applicability, range, and default value of this object vary with type, as described below.
The no form of the command reverts the value to the default.
Default two-way-slm — 1
two-way-delay — 1
single-end-loss — 60
Parameters two-way-slm (SLM) — 1...10
two-way-delay (DM) — 1...10
single-end-loss (LM) — 60...300
Item Description
Syntax data-size data-size
Context configure>eth-cfm>y1731pm>domain
Description Specifies the number of octets in the Value field of the Data TLV of the Ethernet CFM packet.
If zero is specified, the packet has no Data TLV.
This parameter is optional and is valid only if type is specified as two-way-slm.
The no form of the command reverts the value to the default.
Default 0
Parameters data-size — [0...1500]