EasyManuals Logo

Nokia 7330 User Manual

Nokia 7330
626 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #544 background imageLoading...
Page #544 background image
Virtual Private Routed Network Service
544
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
7.10.11.3 authentication-type
Table 580 authentication-type command
Context configure>service>vprn>rip
configure>service>vprn>rip>group
configure>service>vprn>rip>group>neighbor
Description This command sets the authentication password to be passed between RIP neighbors.
The authentication type and authentication key must match exactly for the RIP message to be
considered authentic and processed.
The no form of the command removes the authentication password from the configuration and
disables authentication.
Default Authentication is disabled and the authentication password is empty.
Parameters authentication-key The authentication key. The key can be any combination of ASCII
characters up to 255 characters in length (unencrypted). If spaces are used in the string,
enclose the entire string in quotation marks (“ ”).
hash-key The hash key. The key can be any combination of ASCII characters up to 3452
characters in length (encrypted). If spaces are used in the string, enclose the entire string in
quotation marks (“ ”).
This is useful when a user must configure the parameter, but, for security purposes, the actual
unencrypted key value is not provided.
hash2 Specifies the key is entered in a more complex encrypted form. If the hash2
parameter is not used, the unencrypted form is assumed.
Item Description
(2 of 2)
Item Description
Syntax authentication-type {none | password | message-digest | message-digest-long}
no authentication-type
Context configure>service>vprn>rip
configure>service>vprn>rip>group
configure>service>vprn>rip>group>neighbor
Description This command defines the type of authentication to be used between RIP neighbors. The type
and password must match exactly for the RIP message to be considered authentic and
processed.
The no form of the command removes the authentication type from the configuration and
effectively disables authentication.
Default no authentication-type — No authentication is enabled on an interface.
Parameters none No authentication is used.
password A simple clear-text password is sent.
message-digest MD5 authentication is used.
message-digest-long ????

Table of Contents

Other manuals for Nokia 7330

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nokia 7330 and is the answer not in the manual?

Nokia 7330 Specifications

General IconGeneral
BrandNokia
Model7330
CategoryNetwork Hardware
LanguageEnglish

Related product manuals