Nokia 7330 - Ingress; Table 374 Ingress Command; Table 375 Customer Command; Table 376 Show Customer Command Output

Internet Enhanced Service
398
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
6.10.8.4 ingress
Table 374 ingress command
6.10.9 Show Commands
6.10.9.1 customer
Table 375 customer command
Table 376 describes the command output fields.
Table 376 Show Customer Command Output
Item Description
Syntax ingress
Context configure>service>ies>interface>sap
Description This command enables the context to configure ingress SAP filter policies.
If no ingress filter is defined, no filtering is performed
Item Description
Syntax customer [customer-id]
Context show>service
Description This command displays service customer information.
Parameters customer-id — Displays only information for the specified customer ID.
Default: All customer IDs display
Values: 1 — 2147483647
Label Description
Customer-ID The ID that uniquely identifies a customer.
Contact The name of the primary contact person.
Description Generic information about the customer.
Total Customers The total number of customers configured.
Site Multi-service site name. A multi-service customer site is a group of SAPs with common
origination and termination points.
Service-ID The ID that uniquely identifies a service.
(1 of 2)