Nokia 7330 - Summary

Virtual Private Routed Network Service
602
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
Table 669 describes the standard command output fields for the route table.
Table 669 Show Route Table Standard Output
7.10.12.40 summary
Table 670 summary command
Table 671 describes the output fields for DHCP summary
Table 671 Show DHCP Summary Output
Label Description
IP Addr/mask The static route destination address and mask.
Pref The route preference value for the static route.
Metric The route metric value for the static route.
Type BH — The static route is a black hole route. The Nexthop for this type of route is
black-hole.
ID — The static route is an indirect route, where the nexthop for this type of route
is the non-directly connected next hop.
NH — The route is a static route with a directly connected next hop. The Nexthop
for this type of route is either the next hop IP address or an egress IP interface
name.
Next Hop The next hop for the static route destination.
Interface The egress IP interface name for the static route.
n/a — indicates there is no current egress interface because the static route is
inactive or a black hole route.
Active N — The static route is inactive; for example, the static route is disabled or the next
hop IP interface is down.
Y — The static route is active.
No. of Routes: The number of routes displayed in the list.
Item Description
Syntax summary
Context show>router>dhcp
Description Display the status of the DHCP Relay and DHCP snooping functions on each interface.
Label Description
Interface Name Name of the router interface.
ARP Populate Indicates whether or nor ARP populate is enabled.
(1 of 2)