Nokia 7330 - Mip; Vlan-Dot-1 Q-Etype; Table 82 Mip Command; Table 83 Vlan-Dot1 Q-Etype Command

FD 100/320Gbps NT and FX NT IHub Services Guide Virtual Leased Line Services
Issue: 13 3HH-11985-AAAA-TQZZA 141
4.6.5.16 mip
Table 82 mip command
4.6.5.17 vlan-dot-1q-etype
Table 83 vlan-dot1q-etype command
Item Description
Syntax mip [mac mac-address]
mip default-mac
no mip
Context configure>service>epipe>spoke-sdp>eth-cfm
Description This command enables/disables Maintenance Intermediate Points (MIP)
Parameters mac-address - The MAC address of the MIP in xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx format.
Value: xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx
default-mac - keyword. To indicate the use of default MAC address for the MIP.
Item Description
Syntax vlan-dot1q-etype etype]
no vlan-dot1q-etype
Context configure>service>epipe>
Description This command enables the configruatin of an alternate TPID value to be used at the service
level.
The no form of this command disables the configuration of an alternate TPID value.
Default no vlan-dot1q-etype
Parameters etype - specifies the etype value.
Values are:
• hexadecimal: 0x0600 to 0xffff
• decimal: 1536 to 65535