Nokia 7330 - Table 401 Show Service SAP Output

Internet Enhanced Service
414
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
Table 401 describes the command output fields.
Table 401 Show service SAP Output
Parameters sap sap-id — Specifies the physical port identifier portion of the SAP definition.
Values: [port-id | lag-id] vlanid | no-tag
• port-id
Specifies the physical port ID in the following format:
<port-id> : <nwport-id | ltport-id>
nwport-id - <slot-address>:<port-type>:<port-num>
— slot-address - nt|nt-a|nt-b|ntio-1
— port-type - sfp | xfp |vp | eth | ieee1588 | AI
— port-num - port-number
ltport-id - lt:<rack>/<shelf>/<slot>
— lt - keyword
— rack - number identifying the rack
— shelf - number identifying the shelf
— slot - number identifying the slot
• lag-id
lag: keyword
id: 1 — 64
• vlanid
Specifies the VLAN ID to be associated with the port identified by the SAP. For v-VPLS,
the SAP VLAN ID must match the VLAN ID defined at the v-VPLS level. The null value
can also be specified, to indicate that the SAP will send and receive untagged frames. If
this SAP is not defined, untagged frames will be dropped.
The m-VPLS VLAN ID is always specified as no-tag, which is reserved for untagged L2CP
frames processed to be by the m-VPLS.
Values:
m-VPLS vlanid: no-tag
v-VPLS vlanid: 0 | 1— 4093 (0 specifies untagged frames)
• no-tag
detail — Displays detailed information for the SAP.
Label Description
Service Id The service identifier.
SAP The type of SAP.
Encap The encapsulation type of the SAP.
Ethertype Specifies an Ethernet type II Ethertype value.
Admin State The administrative state of the SAP.
Oper State The operational state of the SAP.
(1 of 2)
Item Description
(2 of 2)