Nokia 7330 - Table 407 Lease-State Command

FD 100/320Gbps NT and FX NT IHub Services Guide Internet Enhanced Service
Issue: 13 3HH-11985-AAAA-TQZZA 419
6.10.10.6 lease-state
Table 407 lease-state command
Item Description
Syntax lease-state ipv6-address ipv6-prefix[/prefix-length]
lease-state mac ieee-address
lease-state sap sap-id
Context clear>service>dhcp6
Description Clears lease state statistics for DHCP6.
Parameters ip-prefix/prefix-length - The destination address of the aggregate route.
Values: ipv6-prefix x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 — FFFF]H
d: [0 — 255]D
ipv6-prefix-length 0 — 64
ieee-address — 6-byte mac-address (xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx).
Cannot be all zeros.
sap sap-id — Specifies the physical port identifier portion of the SAP definition.
Values: [port-id | lag-id]
• port-id
Specifies the physical port ID in the following format:
<port-id> : <nwport-id | ltport-id>
nwport-id - <slot-address>:<port-type>:<port-num>
— slot-address - nt|nt-a|nt-b|ntio-1
— port-type - sfp | xfp |vp | eth | ieee1588 | AI
— port-num - port-number
ltport-id - lt:<rack>/<shelf>/<slot>
— lt - keyword
— rack - number identifying the rack
— shelf - number identifying the shelf
— slot - number identifying the slot
• lag-id
lag: keyword
id: 1 — 64