Nokia 7330 - Common Configuration Tasks

Virtual Private Routed Network Service
426
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
exit
vrrp 1
exit
exit
static-route 6.5.0.0/24 next-hop 10.1.1.2
bgp
router-id 10.0.0.1
group "to-cel"
export "vprnBgpExpPolCust1"
peer-as 65101
neighbor 10.1.1.2
exit
exit
exit
rp
static
exit
bsr-candidate
shutdown
exit
shutdown
exit
exit
exit
rip
export "vprnRipExpPolCust1"
group "cel"
neighbor "to-ce1"
exit
exit
exit
no shutdown
----------------------------------------------
*A:ALA-1>configure>service>vprn#
7.6 Common Configuration Tasks
This section provides a brief overview of the tasks that must be performed to
configure a VPRN service and provides the CLI commands.
1 Associate a VPRN service with a customer ID.
2 Define an autonomous system (optional).
3 Define a route distinguisher (mandatory).
4 Define VRF route-target associations or VRF import/export policies.
5 Create an interface.
6 Define SAP parameters on the interface.
• Select node(s) and port(s).
• Creation of a v-VPLS with which the SAP will be associated
• Creation of L2 SAPs on this v-VPLS (see chapter “Virtual Private LAN Service”).
• Optional - associate filter policies (configured in configure>filter context).
• Optional - configure DHCP features.