FD 100/320Gbps NT and FX NT IHub Services Guide Virtual Private Routed Network Service
Issue: 13 3HH-11985-AAAA-TQZZA 515
7.10.9.29 min-as-origination
Table 526 min-as-origination command
7.10.9.30 min-route-advertisement
Table 527 min-route-advertisement command
Item Description
Syntax min-as-origination seconds
no min-as-origination
Context configure>service>vprn>bgp
configure>service>vprn>bgp>group
configure>service>vprn>bgp>group>neighbor
Description This command configures the minimum interval, in seconds, at which a path attribute,
originated by the local router, can be advertised to a peer.
This configuration parameter can be set at three levels: global level (applies to all peers), group
level (applies to all peers in peer-group) or neighbor level (only applies to specified peer). The
most specific value is used.
The no form of the command used at the global level reverts to default.
The no form of the command used at the group level reverts to the value defined at the global
level.
The no form of the command used at the neighbor level reverts to the value defined at the
group level.
Default 15 seconds
Parameters seconds — The minimum path attribute advertising interval in seconds, expressed as a
decimal integer.
Values: 2 — 255
Item Description
Syntax min-route-advertisement seconds
no min-route-advertisement
Context configure>service>vprn>bgp
configure>service>vprn>bgp>group
configure>service>vprn>bgp>group>neighbor
Description This command configures the minimum interval, in seconds, at which a prefix can be
advertised to a peer.
This configuration parameter can be set at three levels: global level (applies to all peers), group
level (applies to all peers in peer-group) or neighbor level (only applies to specified peer). The
most specific value is used.
The no form of the command reverts to default values.
Default 30 seconds
(1 of 2)
To Next Page
Loading...
