Nokia 7330 - Remote-Mepid; Inactivity-Timer; Table 23 Remote-Mepid Command; Table 24 Inactivity-Timer Command

Services Overview
90
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
3.17.4.7 remote-mepid
Table 23 remote-mepid command
3.17.4.8 inactivity-timer
Table 24 inactivity-timer command
Parameters interval — Specifies the interval between CCM transmissions to be used by all MEPs in the
MA.
Values: 100 milliseconds, 1 second, 10 seconds, 60 seconds, and 600 seconds
Item Description
(2 of 2)
Item Description
Syntax [no] remote-mepid mep-id
Context configure>eth-cfm>domain>association
Description This command configures the remote maintenance association end point MEP identifier.
Parameters mep-id — Maintenance association end point identifier of a remote MEP whose information
from the MEP database is to be returned.
Values: 1...8191
Item Description
Syntax inactivity-timer timeout
Context configure>eth-cfm>slm
Description Configure the SLM inactivity timer for maintaining stale test data.
Default None
Parameters timeout — [1...100]