Mirror Services
616
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
8.6.3 Show Commands
show
— mirror mirror-dest [service-id]
8.7 Mirror Service CLI Configuration Commands
The following commands are described:
• Generic Commands
• Mirror Configuration Commands
• Debug Configuration Commands
• Show Commands
8.7.1 Generic Commands
8.7.1.1 description
Table 689 description command
Item Description
Syntax description description-string
no description
Context configure>mirror>mirror-dest
Description This command creates a text description stored in the configuration file for a configuration
context.
The description command is a text string to help you identify the content of the file.
The no form of the command removes the description string.
Default There is no default description associated with the configuration context.
Parameters description-string - The description character string. Allowed values are any string up to 80
characters long composed of printable, 7-bit ASCII characters. If the string contains special
characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
To Next Page
Loading...
