Virtual Leased Line Services
154
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
4.6.6.11 sdp
Table 103 sdp command
Table 104 describes the command output fields.
Table 104 Show Service-ID SDP Output Fields
Item Description
Syntax sdp sdp-id far-end ip-addr detail
Context show>service>id
Description Displays information for the SDPs associated with the service.
If no optional parameters are specified, a summary of all associated SDPs is displayed.
Parameters sdp-id — Displays only information for the specified SDP ID.
Default: All SDPs.
Values: 1 — 17407
far-end ip-addr — Displays only SDPs matching the specified far-end IP address.
Default: SDPs with any far-end IP address.
detail — Displays detailed SDP information.
Label Description
Sdp Id The SDP identifier.
Type Indicates whether the SDP is a spoke or a mesh.
VC Type The VC type, ether, vlan, or vpls.
VC Tag The explicit dot1Q value used when encapsulating to the SDP far end.
I. Lbl The VC label used by the far-end device to send packets to this device in this service by
the SDP.
Admin Path MTU The operating path MTU of the SDP is equal to the admin path MTU (when one is set)
or the dynamically computed tunnel MTU, when no admin path MTU is set (the default
case.)
Oper Path MTU The actual largest service frame size (in octets) that can be transmitted through this SDP
to the far-end router, without requiring the packet to be fragmented.
Far End Specifies the IP address of the remote end of the MPLS tunnel defined by this SDP.
Delivery Specifies the type of delivery used by the SDP: MPLS.
Admin State The administrative state of this SDP.
Oper State The current state of this SDP.
Ingress Label The label used by the far-end device to send packets to this device in this service by this
SDP.
Egress Label The label used by this device to send packets to the far-end device in this service by the
SDP.
Last Changed The date and time of the most recent change to the SDP.
(1 of 2)
To Next Page
Loading...
Need help?
General
