Nokia 7330 - Service Management Tasks; Modifying Customer Accounts; Deleting Customers; Modifying Sdps

FD 100/320Gbps NT and FX NT IHub Services Guide Services Overview
Issue: 13 3HH-11985-AAAA-TQZZA 57
3.8.4 Service Management Tasks
This section discusses the following service management tasks:
• Modifying Customer Accounts
• Deleting Customers
• Modifying SDPs
• Deleting SDPs
• Modifying LSPs
• Deleting LSPs
3.8.4.1 Modifying Customer Accounts
To access a specific customer account, you must specify the customer ID.
To display a list of customer IDs, use the show service customer command.
Enter the parameter (description, contact, phone) and then enter the new
information.
configure>service# customer customer-id [create]
[no] contact contact-information
[no] description description-string
3.8.4.2 Deleting Customers
The no form of the customer command removes a customer ID and all associated
information. All service references to the customer must be shut down and deleted
before a customer account can be deleted.
configure>service# [no] customer customer-id
3.8.4.3 Modifying SDPs
To access a specific SDP, you must specify the SDP ID. To display a list of SDPs,
use the show service sdp command. Enter the parameter, such as description,
far-end, and lsp, and then enter the new information.
configure>service# sdp sdp-id
Note — Once created, you cannot modify the SDP
encapsulation type.