Nokia 7330 - Basic Configuration

FD 100/320Gbps NT and FX NT IHub Services Guide Virtual Private Routed Network Service
Issue: 13 3HH-11985-AAAA-TQZZA 425
Topics in this section include:
• Basic Configuration
• Common Configuration Tasks
• Configuring VPRN Components
• Creating a VPRN Service
• Configuring Global VPRN Parameters
• Configuring VPRN Protocols - BGP
• Configuring VPRN Protocols - RIP
• Configuring VPRN Protocols - OSPF
• Configuring a VPRN Interface
• Configuring a VPRN Interface - SAP
• Service Management Tasks
• Modifying VPRN Service Parameters
• Deleting a VPRN Service
• Disabling a VPRN Service
• Re-enabling a VPRN Service
7.5 Basic Configuration
The following fields require specific input (there are no defaults) to configure a basic
VPRN service:
• Customer ID (refer to “Configuring Customers”)
• Specify interface parameters
The following example displays a sample configuration of a VPRN service.
*A:ALA-1>configure>service>vprn# info
----------------------------------------------
vrf-import "vrfImpPolCust1"
vrf-export "vrfExpPolCust1"
ecmp 2
autonomous-system 10000
route-distinguisher 10001:1
vrf-target target:10001:1
interface "to-ce1" create
address 11.1.0.1/24
proxy-arp
exit
sap nt:sfp:1:1 create
ingress
qos 100
exit
egress
qos 1010
filter ip 10
exit
exit
dhcp
description "DHCP test"