Nokia 7330 - Summary; Table 391 Summary Command; Table 392 Show DHCP6 Summary Output; Table 393 Lease-State Command

FD 100/320Gbps NT and FX NT IHub Services Guide Internet Enhanced Service
Issue: 13 3HH-11985-AAAA-TQZZA 409
6.10.9.12 summary
Table 391 summary command
Table 392 describes the command output fields.
Table 392 Show DHCP6 Summary Output
6.10.9.13 lease-state
Table 393 lease-state command
Item Description
Syntax summary
Context show>service>id>dhcp6
Description Displays DHCP6 configuration summary information.
Label Description
Interface Name Name of the interface.
SapId The configuration identification.
Used/Max Relay Used — The number of lease-states that are currently in use on a specific interface, that
is, the number of clients on that interface got an IP address by DHCP. This value is
always less than or equal to the ‘Provided’ field.
Max — The lease-populate value that is configured for a specific interface.
Admin Indicates the administrative state.
Oper relay Indicates the operative state.
Item Description
Syntax lease-state [detail]
lease-state [detail] interface interface-name
lease-state [detail] ipv6-address ipv6-prefix[/prefix-length]
lease-state [detail] mac ieee-address
Context show>service>id>dhcp6
Description This command displays DHCP lease state related information.
(1 of 2)