Nokia 7330 - Customer; Service-Using; Table 41 Customer Command; Table 42 Show Customer Command Output Fields

Services Overview
98
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
3.17.6.1 customer
Table 41 customer command
Table 42 describes the command output fields.
Table 42 Show Customer Command Output Fields
3.17.6.2 service-using
Table 43 service-using command
Item Description
Syntax customer [customer-id] [site customer-site-name]
Context show>service
Description Displays service customer information.
Parameters customer-id — Displays only information for the specified customer ID.
Default: All customer IDs display.
Values: 1...2147483647
site customer-site-name — Specifies the customer site which is an anchor point for an ingress
and egress virtual scheduler hierarchy.
Label Description
Customer-ID The ID that uniquely identifies a customer.
Contact The name of the primary contact person.
Description Generic information about the customer.
Total Customers The total number of customers configured.
Site Multi-service site name. A multi-service customer site is a group of SAPs with common
origination and termination points.
Service-ID The ID that uniquely identifies a service.
SAP Specifies the SAP assigned to the service.
Item Description
Syntax service-using [epipe] [ies] [vpls] [vprn] [mirror] [v-vpls] [m-vpls] sdp sdp-id [customer
customer-id]
(1 of 2)