Virtual Private LAN Service
274
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
5.16.2.40 storm-control
Table 165 storm-control command
5.16.2.41 bgp
Table 166 bgp command
Description This command enables and disables user to user communication for a v-VPLS service. It does
not apply to m-VPLS. When enabled, user to user traffic is permitted between users on distinct
SAPs. The user side relates to v-VPLS SAPs constructed on residential ports. User-to-user
communication for users situated on the same SAP is anyway not possible. Network side
relates to v-VPLS SAPs constructed on regular ports. Network Ports (including subtending
ISAM ports) are created in regular mode. If the port is later assigned to a sub-tending NE, the
port can be changed to residential in the port extension table, and user-to-user communication
can be enabled in the v-VPLS instance.
This parameter can be invoked at any point in time.
Default no user-user-com
Item Description
(2 of 2)
Item Description
Syntax storm-control
no storm-control
Context configure>service>vpls
configure>service>epipe
Description This command enables storm-control rate limiting on a service.
Default None
Item Description
Syntax bgp
Context configure>service>vpls
Description This command enables the context to configure the BGP related parameters for both BGP AD
and BGP VPLS.
To Next Page
Loading...
Need help?
General
