Nokia 7330 - Source-Address; Table 475 Source-Address Command; Table 476 Icmp6 Command; Table 477 Packet-Too-Big Command

FD 100/320Gbps NT and FX NT IHub Services Guide Virtual Private Routed Network Service
Issue: 13 3HH-11985-AAAA-TQZZA 487
7.10.6.11 source-address
Table 475 source-address command
7.10.6.12 icmp6
Table 476 icmp6 command
7.10.6.13 packet-too-big
Table 477 packet-too-big command
Item Description
Syntax source-address ipv6-address
no source-address
Context configure>service>vprn>interface>ipv6>dhcp6-relay
Description This commandspecifies a source IPv6 address which will bthe e used as source IPv6 address
in all the relayed DHCPv6 messages. By default all DHCPv6 relay messages will use the
outgoing interface IPv6 address as source address.
A maximum of 8 DHCP servers can be configured.
Default no source-address
Parameters ipv6-address — Specify the source IPv6 address.
Item Description
Syntax icmp6
Context configure>service>vprn>interface>ipv6
Description This command configures ICMPv6 for the interface.
Item Description
Syntax packet-too-big [number seconds]
no packet-too-big
Context configure>service>vprn>interface>ipv6>icmp6
(1 of 2)