FD 100/320Gbps NT and FX NT IHub Services Guide Virtual Private Routed Network Service
Issue: 13 3HH-11985-AAAA-TQZZA 507
7.10.9.17 group
Table 514 group command
7.10.9.18 neighbor
Table 515 neighbor command
Item Description
Syntax group [name]
no group
Context configure>service>vprn>bgp
Description This command creates a context to configure a BGP peer group.
The no form of the command deletes the specified peer group and all configurations
associated with the peer group. The group must be shutdown before it can be deleted.
Default None — No peer groups are defined.
Parameters name — The peer group name. Allowed values is a string up to 32 characters long composed
of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces, etc.),
the entire string must be enclosed within double quotes.
Item Description
Syntax [no] neighbor
Context configure>service>vprn>bgp>group
configure>service>vprn>bgp>group>neighbor
Description This command creates a BGP peer/neighbor instance within the context of the BGP group.
This command can be issued repeatedly to create multiple peers and their associated
configuration.
The no form of the command is used to remove the specified neighbor and the entire
configuration associated with the neighbor. The neighbor must be administratively shutdown
before attempting to delete it. If the neighbor is not shutdown, the command will not result in
any action except a warning message on the console indicating that neighbor is still
administratively up.
Default no neighbor
To Next Page
Loading...
