FD 100/320Gbps NT and FX NT IHub Services Guide Virtual Leased Line Services
Issue: 13 3HH-11985-AAAA-TQZZA 145
Table 89 Show Service SAP Output Fields
4.6.6.4 sdp
Table 90 sdp command
Table 91 describes the command output fields.
Label Description
Port ID The ID of the access or hybrid port where the SAP is defined.
Svc ID The service identifier.
Sap MTU The SAP MTU value.
I.QoS The SAP ingress QoS policy number specified on the ingress SAP.
I.MAC/IP The MAC or IP filter policy ID applied to the ingress SAP.
E.QoS The SAP egress QoS policy number specified on the egress SAP.
E.Mac/IP The MAC or IP filter policy ID applied to the egress SAP.
A.Pol The accounting policy ID assigned to the SAP.
Adm The administrative state of the SAP.
Opr The operational state of the SAP.
Item Description
Syntax sdp [sdp-id | far-end ip-addr] [detail]
Context show>service
Description This command displays SDP information.
If no optional parameters are specified, a summary SDP output for all SDPs is displayed.
Parameters sdp-id — The SDP ID for which to display information.
Default: All SDPs.
Values: 1 — 17407
far-end ip-address — Displays only SDPs matching with the specified far-end IP address.
Default: SDPs with any far-end IP address.
detail — Displays detailed SDP information.
Default: SDP summary output.
To Next Page
Loading...
