Nokia 7330 - External Packet Forwarding

Virtual Private LAN Service
196
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
sap nt-a:xfp:2:500 create
exit
no shutdown
---------------------------------------------------------------
>configure>service>vpls#
>configure>port>nt-a:xfp:2:500>ethernet
---------------------------------------------------------------
use-vlan-dot1q-etype
-------------------------------------------------------------------
To disable the use of an alternate TPID, use the no vlan-dot1q-etype command.
>configure>service>vpls# info
-------------------------------------------------------------
[no] vlan-dot1q-etype <etype>
sap nt-a:xfp:2:500 create
exit
no shutdown
-------------------------------------------------------------
5.8.2.8 External Packet Forwarding
The following CLI command syntax can be used to enable or disable external packet
forwarding for a v-VPLS instance:
configure service vpls <vpls-id> extfwd [no] device-ip <ip-address>
The following example displays external packet forwarding configuration:
leg:isadmin># info configure service
----------------------------------------------
customer 1 create
description "Default customer"
exit
vpls 1000 customer 1 v-vpls vlan 1000 create
shutdown