Nokia 7330 - Clearing VPLS Operational Data

Virtual Private LAN Service
220
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
*A:SetupCLI# show service id 17 fdb
====================================================================
Forwarding Database, Service 17
====================================================================
Service Id : 17
Service Type : v-VPLS
Table Size : 250 Total Count : 8
Learned Count : 0 Static Count : 8
OAM-learned Count : 0
Host-learned Count: 0
Local Age : 300
High WaterMark : 95% Low Watermark : 90%
Mac Learning : Enabl Discard Unknown : Dsabl
Mac Aging : Enabl
====================================================================
The following example illustrates output from the service-using show command:
==========================================================================
*A:SetupCLI# show service fdb-mac
==========================================================================
Service Forwarding Database
==========================================================================
ServId MAC Source-Identifier Type/Age Last Change
--------------------------------------------------------------------------
17 10:20:30:40:50:60 sap:4/2/11:117 Static 07/23/2008 23:51:19
17 10:20:30:40:50:61 sap:4/2/11:117 Static 07/23/2008 23:51:32
17 10:20:30:40:50:62 sap:4/2/11:117 Static 07/23/2008 23:51:40
17 10:20:30:40:50:63 sap:4/2/11:117 Static 07/23/2008 23:51:54
17 10:20:30:40:51:60 sap:4/2/30:117 Static 07/23/2008 23:52:39
17 10:20:30:40:52:60 sap:4/2/30:117 Static 07/23/2008 23:52:47
17 10:20:30:40:53:60 sap:4/2/30:117 Static 07/23/2008 23:53:11
17 10:20:30:40:54:60 sap:4/2/30:117 Static 07/23/2008 23:53:26
23 00:00:00:01:00:01 sap:4/2/30:3000 Host 06/13/2008 01:34:22
--------------------------------------------------------------------------
No. of Entries: 9
==========================================================================
5.9.5 Clearing VPLS operational data
The operator can clear v-VPLS and m-VPLS operational data, including the
following:
• FDB database and mac specific forwarding information
• STP statistics
• IGMP statistics
• SAP statistics
The following command syntax displays SAP operational data:
clear service <service-id> stats fdb
clear service <service-id> stats stp