FD 100/320Gbps NT and FX NT IHub Services Guide Virtual Private LAN Service
Issue: 13 3HH-11985-AAAA-TQZZA 257
 
5.16.2.11 extfwd
Table 134 extfwd command
5.16.2.12 device-ip
Table 135 device-ip command
5.16.2.13 fdb-table-size
Table 136 fdb-table-size command
Item Description
Syntax extfwd
Context configure>service>vpls
Description This command enables the context to configure External Packet Forwarding (EPF) policies.
Item Description
Syntax device-ip ip-address
no device-ip
Context configure>service>vpls>extfwd
Description This command enables External Packet Forwarding (EPF) for voice traffic and disables 
hair-pinning on the v-VPLS service. The IP address configured with this command will act as 
the next-hop for all up-stream packets (both signaling and voice) from the voice LTs in the 
v-VPLS. This command is supported only on a v-VPLS service and not on a VPLS service.
Parameters ip-address — Specifies the IPv4 unicast address.
Item Description
Syntax fdb-table-size table-size
no fdb-table-size
Context configure>service>vpls
Description This command specifies the maximum number of MAC entries in the forwarding database 
(FDB) for the v-VPLS instance on this node.
The fdb-table-size specifies the maximum number of forwarding database entries for both 
learned and static MAC addresses for the v-VPLS instance.
The no form of this command returns the maximum FDB table size to default.
Default 250
(1 of 2)