FD 100/320Gbps NT and FX NT IHub Services Guide Virtual Private Routed Network Service
Issue: 13 3HH-11985-AAAA-TQZZA 587
 
7.10.12.26 interface
Table 642 interface command
Table 643 describes the command output fields for an IP interface
Total BGP Routes The total number of BGP routes learned from BGP peers.
Total BGP Paths The total number of unique sets of BGP path attributes learned from BGP peers.
Total Path Memory Total amount of memory used to store the path attributes.
Total Suppressed Routes Total number of suppressed routes due to route damping.
Total History Routes Total number of routes with history due to route damping.
Total Decayed Routes Total number of decayed routes due to route damping.
Neighbor BGP neighbor address.
AS
(Neighbor)
BGP neighbor autonomous system number.
PktRcvd Total number of packets received from the BGP neighbor.
PktSent Total number of packets sent to the BGP neighbor.
InQ The number of BGP messages to be processed.
OutQ The number of BGP messages to be transmitted.
Up/Down The amount of time that the BGP neighbor has either been established or not 
established depending on its current state.
State|Recv/Actv/Sent The BGP neighbor’s current state (if not established) or the number of received 
routes, active routes and sent routes (if established). 
Label Description
(2 of 2)
Item Description
Syntax interface  [{[ip-address | ip-int-name] [detail]}] | [summary] | [exclude-services]
Context show>router
Description This command displays the router IP interface table sorted by interface index.
Parameters ip-address — Only displays the interface information associated with the specified IP address.
ip-int-name — Only displays the interface information associated with the specified IP 
interface name.
detail — Displays detailed IP interface information.
summary — Displays summary IP interface information for the router.
exclude-services — Displays IP interface information, excluding IP interfaces configured for 
customer services.  Only core network IP interfaces are displayed.