Virtual Private LAN Service
292
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
5.16.3.17 mst-name
Table 199 mst-name command
5.16.3.18 mst-revision
Table 200 mst-revision command
5.16.3.19 path-cost
Table 201 path-cost command
Item Description
Syntax mst-name region-name
no mst-name
Context configure>service>vpls>stp
Description This command defines an MST region name. Two bridges are considered as a part of the same
MST region as soon as their configuration of the MST region name, the MST-revision and
VLAN-to-instance assignment is identical.
The no form of this command removes region-name from the configuration.
Default no mst-name
Parameters region-name — Specifies an MST-region name up to 32 characters in length.
Item Description
Syntax mst-revision revision-number
Context configure>service>vpls>stp
Description This command defines the MST configuration revision number. Two bridges are considered
as a part of the same MST region as soon as their configuration of MST-region name,
MST-revision and VLAN-to-instance assignment is identical.
The no form of this command returns the MST configuration revision to its default value.
Default 0
Parameters revision-number — Specifies the MSTP region revision number to define the MSTP region.
Values: 0 — 65535
Item Description
Syntax path-cost sap-path-cost
no path-cost
(1 of 2)
To Next Page
Loading...
Need help?
General
