Nokia 7330 - Page 190

Virtual Private LAN Service
190
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
exit
exit
no shutdown
...
----------------------------------------------
*A:ALA-1>configure>service>vpls#
Multiple v-VPLS instances can be configured for the ISAM. Note that the customer
ID must be specified when creating the service, but is optional when making
modifications.
configure service vpls <service-id> [customer <customer-id>] v-vpls vlan
<vlan-id> create
The following illustrates a basic v-VPLS configuration:
*A:ALA-1>configure>service>vpls# info
----------------------------------------------
...
v-vpls 200 customer 1 vlan 2001 create
description “Local vVPLS”
exit
no shutdown
...
----------------------------------------------
*A:ALA-1>configure>service>vpls#
Multiple VPLS instances can be configured for the ISAM. Note that the customer ID
must be specified when creating the service, but is optional when making
modifications.
configure service vpls <service-id> [customer <customer-id>] v-vpls vlan
<vlan-id> create
The following illustrates a basic VPLS configuration:
*A:ALA-1>configure>service>vpls# info
----------------------------------------------
...
vpls 9000 customer 1 create
description “This is a distributed VPLS”
def-mesh-vc-id 750
stp
shutdown
exit
...
----------------------------------------------
*A:ALA-1>configure>service>vpls#
The following conditions apply when creating any VPLS:
• For an m-VPLS, the default customer ID 1 must be specified. For the v-VPLS or
VPLS services, 1 or an existing customer ID can be specified. When modifying a
service, the customer ID is optional.
• A description can be specified only after the service is created.