Virtual Private LAN Service
332
FD 100/320Gbps NT and FX NT IHub Services Guide
3HH-11985-AAAA-TQZZA Issue: 13
Root path cost Specifies the cost of the path to the root bridge as seen from this bridge.
Root forward delay Specifies how fast the root changes its state when moving toward the forwarding state.
Root hello time Specifies the amount of time between the transmission of configuration BPDUs.
Root max age Specifies the maximum age of Spanning Tree Protocol information learned from the
network on any port before it is discarded.
Root priority This object specifies the priority of the bridge that is currently selected as root-bridge
for the network.
Root port Specifies the port number of the port which offers the lowest cost path from this bridge
to the root bridge.
SAP Identifier The ID of the access or hybrid port where this SAP is defined.
RSTP State The operational state of RSTP.
STP Port State Specifies the port identifier of the port on the designated bridge for this port's segment.
BPDU encap Specifies the type of encapsulation used on BPDUs sent out and received on this SAP.
Port Number Specifies the value of the port number field which is contained in the least significant
12 bits of the 16-bit Port ID associated with this SAP.
Priority Specifies the value of the port priority field which is contained in the most significant 4
bits of the 16-bit Port ID associated with this SAP.
Cost Specifies the contribution of this port to the path cost of paths towards the spanning tree
root which include this port.
Fast Start Specifies whether Fast Start is enabled on this SAP.
Designated Port Specifies the port identifier of the port on the designated bridge for this port's segment.
Designated Bridge Specifies the bridge identifier of the bridge which this port considers to be the
designated bridge for this port's segment.
Service Access Points
Managed by Service Specifies the service-id of the management VPLS managing this SAP.
Managed by
SAP/spoke
Specifies the sap-id inside the management VPLS managing this SAP.
Prune state Specifies the STP state inherited from the management VPLS.
Label Description
(2 of 2)