Rohde & Schwarz R&S SMW200A - Page 1057

Remote Control Commands
R&S
®
SMW200A
1057User Manual 1175.6632.02 ─ 30
Example:
BB:ARB:MCAR:EDIT:CARR:DEL 5 us
Sets a start delay of 5 us for the carriers in the carrier range.
BB:ARB:MCAR:EDIT:CARR:DEL:STEP 1 us
The start delay is incremented by 1us for each carrier. That is,
the first carrier has a start delay of 5 us, the second a start delay
of 6 us, and so on.
Manual operation: See "Delay Step" on page 395
[:SOURce<hw>]:BB:ARBitrary:MCARrier:EDIT:CARRier:DELay[:STARt] <Start>
Sets the start delay for the individual carriers in the defined carrier range.
Parameters:
<Start> float
Range: 0 to 1
Increment: 1E-9
*RST: 0
Default unit: s
Example:
BB:ARB:MCAR:EDIT:CARR:DEL 5us
Sets a start delay of 5 us for the carriers in the carrier range.
Manual operation: See "Delay Start" on page 395
[:SOURce<hw>]:BB:ARBitrary:MCARrier:EDIT:CARRier:FILE <File>
Selects the input file. The data of the file are modulated onto the carriers in the defined
carrier range.
Parameters:
<File> string
Example:
BB:ARB:MCAR:EDIT:CARR:FILE
"/var/user/temp/IQ_wcdma"
selects input file IQ_wcdma.
Manual operation: See "Input Waveform File" on page 395
[:SOURce<hw>]:BB:ARBitrary:MCARrier:EDIT:CARRier:EXECute
Adopts the settings for the selected carrier range.
Example:
BB:ARB:MCAR:EDIT:CARR:STAR 4
BB:ARB:MCAR:EDIT:CARR:STOP 20
BB:ARB:MCAR:EDIT:CARR:STAT ON
BB:ARB:MCAR:EDIT:CARR:EXEC
Usage: Event
Manual operation: See "Apply Assistant Settings" on page 395
SOURce Subsystem