Rohde & Schwarz R&S SMW200A - Page 1238

Remote Control Commands
R&S
®
SMW200A
1238User Manual 1175.6632.02 ─ 30
Usage: Query only
Manual operation: See "Versions" on page 1265
:SYSTem:SRData?
Queris the SCPI recording data from the internal file.
This feature enables you to transfer an instrument configuration to other test environ-
ments, as e.g. laboratory virtual instruments.
Return values:
<FileData> block data
Example:
SYSTem:SRData?
// #3118:SOURce1:ROSCillator:SOURce EXT
// :SOURce1:FREQuency:CW 4000000000
// :SOURce1:FREQuency:OFFSet 1000000
// :SOURce1:AM1:STATe 1
// :OUTPut1:STATe 1
Usage: Query only
:SYSTem:STARtup:COMPlete?
Queries if the startup of the instrument is completed.
Return values:
<Complete> 0 | 1 | OFF | ON
*RST: 0
Example:
SYST:STAR:COMP?
Response: 1
the startup of the instrument is completed.
Usage: Query only
:SYSTem:OPTion:TRIal:LIST?
Queries the options included in the trial license. For a list of all available options and
their description, refer to the data sheet.
Return values:
<TrialOptList> string
Example: see Example "Using the trial license" on page 1218
Usage: Query only
Manual operation: See "Trial License Table" on page 745
:SYSTem:OPTion:TRIal[:STATe] <TrialOptState>
Activates the trial license.
SYSTem Subsystem