Remote Control Commands
R&S
®
SMW200A
1242User Manual 1175.6632.02 ─ 30
:SYSTem:DFPR?
Queries the device footprint of the instrument. The retrieved information is in machine-
readable form suitable for automatic further processing.
If you are obtaining technical support as described in Chapter 15.8, "Collecting Infor-
mation for Technical Support", on page 1267, this information is automatically retrieved
and is part of the created *.tar.gz support file.
Return values:
<DeviceFootprint> string
Information on the instrument type, device identification and
details on the installed FW version, hardware and software
options.
Example:
:SYSTem:DFPR?
Usage: Query only
:SYSTem:REBoot
Reboots the instrument including the operating system.
Usage:
Event
:SYSTem:RESTart
Restarts the instrument without restarting the operating system.
Usage:
Event
:SYSTem:SHUTdown
Shuts down the instrument.
Usage:
Event
:SYSTem:WAIT <TimeMs>
Delays the execution of the subsequent remote command by the specified time.
This function is useful, for example to execute an SCPI sequence automatically but
with a defined time delay between some commands.
See Chapter 12.3.4, "How to Assign Actions to the [USER] Key", on page 738.
Setting parameters:
<TimeMs> integer
Wait time in ms
Range: 0 to 10000
*RST: 0
SYSTem Subsystem
To Next Page
Loading...