Troubleshooting and Error Messages
R&S
®
SMW200A
1267User Manual 1175.6632.02 ─ 30
2. Select "RF Assembly".
The dialog lists the RF hardware components that are installed on the R&S SMW.
Proceed the same way to get information for instance on general or baseband hard-
ware modules, or on the operating times of the R&S SMW in the corresponding tab.
15.7.4 How to Request the Data Sheet
You can access data sheet related information vie the LXI web browser, see "Data
Sheet" on page 802.
15.8 Collecting Information for Technical Support
If you encounter problems that you cannot solve yourself, contact your
Rohde & Schwarz support center as listed at http://www.customersupport.rohde-
schwarz.com. Our support center staff is optimally trained to assist you in solving prob-
lems.
The support center finds solutions more quickly and efficiently if you provide them with
information on the instrument and an error description.
●
The following dialog boxes in the "Setup > Instrument Assembly" menu provide
useful information:
– Hardware Configuration: hardware assemblies
– Software and Options: the status of all software and hardware options instal-
led on your instrument
●
System Messages: displayed in the "Info" line and provide information on any
errors that have occurred
Collecting Information for Technical Support
To Next Page
Loading...