Rohde & Schwarz R&S SMW200A - Page 1327

Reference Information for Remote Control
R&S
®
SMW200A
1327User Manual 1175.6632.02 ─ 30
D.1.5 Status Reporting System
The status reporting system stores all information on the current operating state of the
instrument, and on errors which have occurred. This information is stored in the status
registers and in the error queue.
You can query both with the commands of the STATus Subsystem.
D.1.5.1 Hierarchy of the Status Registers
The Figure D-1 shows the hierarchical structure of information in the status registers
(ascending from left to right).
Figure D-1: Graphical overview of the status registers hierarchy
Additional Basics on Remote Control