Getting Started
R&S
®
SMW200A
40User Manual 1175.6632.02 ─ 30
For more information, refer to Chapter 12, "General Instrument Functions",
on page 709.
Table 3-3: Utility keys
Utility key Assigned functions
[PRESET] Sets the instrument to a defined state
[SAVE/RCL] Saves and loads instrument setting
Accesses the file manager
[LOCAL] Switches from remote control to local (manual) control
[SETUP] Accesses the general instrument settings
[HCOPY] Opens the "Hardcopy" dialog for storing the current display in a file
[INFO] Displays status messages, error messages, and warnings
[HELP] Displays context-sensitive help text
On/Standby
The [On/Standby] key switches the instrument from the standby to the ready state or
vice versa.
The LED above the [On/Standby] key indicates the instrument state, see Chap-
ter 3.1.13, "Switching On or Off", on page 36.
Function Keys
Function keys provide access to most common generator settings and functions.
A detailed description of the corresponding functions is provided in the user manual.
Table 3-4: Function keys
Function key Assigned functions
[FREQ]
Activates frequency entry.
1)
[LEVEL]
Activates level entry.
1)
[Diagram] Brings the block diagram to the foreground. Active dialogs are minimized.
[RF ON/OFF]
Switches the RF output on and off.
2)
[MOD ON/OFF]
Switches the modulations on and off.
2)
[USER] Key with a customizable function. You can define the action to be execu-
ted.
Function execution (in navigation controls area)
[ON/OFF TOGGLE]
●
Switches highlighted elements or a function block on and off.
●
Switches between two or more settings, e.g. items of selection lists.
At the end of a list, the cursor is set on the first entry again.
1)
The entry field that was active last is activated. Press the key again to activate the
entry field of the other path.
Instrument Tour
To Next Page
Loading...