Getting Started
R&S
®
SMW200A
89User Manual 1175.6632.02 ─ 30
3.4.2.5 Generation of an LTE Test Signal with Carrier Aggregation and 2x2 MIMO each
Component Carrier
The block diagram in this example depicts the generation of an EUTRA/LTE test signal
with two component carriers (intra-band carrier aggregation) and 2x2 MIMO fading
each, for example for UE tests. The instrument uses a coupled internal baseband
source and both RF outputs.
3.4.2.6
Generation of a WLAN 802.11ad Signal with 1.76 GHz Bandwidth
The block diagram in this example depicts the generation of a WLAN 802.11ad test
signal with 1.76 GHz bandwidth. The instrument uses one internal wideband baseband
generator with 2 GHz bandwidth and one RF output.
System Overview
To Next Page
Loading...